Search This Blog

Followers

Saturday, September 29, 2018

An ancient water pump

Sometimes, Lady Fortuna is very, very kind to me, and presents me with 'gifts' that are truly out of the ordinary. Last Friday was one of those days, as I came across this incredible water pump which, of course, I had to have the second I saw it!

The water pump, measuring 11 x 7,5 x 14 cm, or 4,3 x 2,9 x 5,5 inch.

The water pump is probably a century old, made in Germany, and exquisite in every detail. Unfortunately it does not work, although the lever at the back does move as it should. There is a loose part inside the shaft, which rattles when I shake it a bit, but the only way to access it would require dismantling the pump, which of course I won't do! Hence, I'll leave it as it is!

The dolphin on top of the water spout adds a delicate detail to it, lifting the entire water pump to a higher level of beauty.
The water spout has a dolphin sitting on top of it, modeled in an ancient fashion, very similar to those found in classical, European gardens, Medieval artwork and geographical maps. Below is an image of two Roman dolphin statues showing a striking resemblance to the little fellow on the water spout.

Roman dolphin statues in Florence, Italy.
Overall, it's beautifully weathered and rusted, as you can see in detail on the images below; a gem to treasure and cherish! I consider myself very lucky, and although its price was a bit steep, I think it's totally worth it!

The water basin is beautifully rusted.



The weathering is phenomenal, and all natural!




Thanks for visiting, and see you next time!

© José Pereira Torrejón. All rights reserved. No part of the content of this blog may be distributed, published or reproduced without prior authorization from the author. The Roman dolphin statue image is an edited sample of the original picture by FantomeAngel.

Thursday, September 27, 2018

'Nosferatu' shadow box featured in American Miniaturist Magazine!


Dear All, 

I'm very happy to announce that my 'Nosferatu' shadow box is featured in the October issue of American Miniaturist Magazine, with a 5-page article! And, believe me, it looks totally cool! It is a great honor for me to be featured in such a prestigious magazine, and I can't thank its editor, Auralea Krieger, enough for giving me that unique opportunity! 

And of course I also want to thank you all for your constant support and encouragement!
Below is a caption of the first page of the article. 

First page of the 5-page article in American Miniaturist's October 2018 issue.

Thanks for visiting, and see you next time!

© José Pereira Torrejón. All rights reserved. No part of the content of this blog may be distributed, published or reproduced without prior authorization from the author.

Wednesday, September 26, 2018

Jane's attic, update XV: Parts for the gutter.

Today I received  some additional parts to be used to build a gutter for the attic's roof. The parts are lovely crafted in metal, and they're actually quite heavy. I got them from Sussex Crafts, UK. 

Can't wait to install them and see how they'll look like weathered and all, but I already know this gutter will be great!

Below are two pics of some of the parts.



Thanks for visiting, and see you next time!

© José Pereira Torrejón. All rights reserved. No part of the content of this blog may be distributed, published or reproduced without prior authorization from the author.

Monday, September 24, 2018

SAFETY, ALWAYS!

This blog is meant to raise awareness around safety while working on our passion: miniatures!

Recently I bought a wonderful electrical modelling and engraving tool which is incredibly helpful for many purposes, like cutting, sanding, and engraving.



However,  looking at one of its accessories at work, a sharp toothed disc rotating at high speed, made me aware of the potential safety hazards generating from its usage. This involves not only possibly cutting your fingers in a very nasty way, but also getting hurt by bits and pieces of metal flying around (I call it 'shrapnel') and - God forbid- potentially hitting your eyes.


Hence, I strongly recommend you to keep the focus on your work at all times, no shortcuts, and to use protective gear like gloves and (specially when cutting stuff) safety goggles. If a tough guy like me can use them, so can you, snowflake! ;)


Thanks for visiting, and be safe!!
 
© José Pereira Torrejón. All rights reserved. No part of the content of this blog may be distributed, published or reproduced without prior authorization from the author.

Wednesday, September 19, 2018

Jane's attic, update XIV: A dormer window.


This update focuses on a dormer window that I've created for the front of Jane's attic. Now dormer windows are more difficult to install than regular one's because they need to stand upright in a 45° angle relative to the slanted surface of the roof. In this case there was an extra challenge to it, because the window had to be placed half way between the roof and the wall. The reason for this, is that if I had placed the window higher up the roof, it would have been impossible for poor little Jane to look out of it, because it would have been much too high, and we don't want that, do we?



The nice thing about this, is that I could go for a bigger window. My dormer window is actually a modified, regular window. This means that I added extra pieces to its sides, which then were carved, plastered and sealed with aluminum around the edges to make it look more realistic. After that I weathered the bejesus out of the innocent window for that eerie, derelict feel.


I really love the way the aluminum sealing turned out, it looks so realistic! It was made of thin aluminum strips, then glued into place and weathered. As with everything, it took more time to create my own, custom made dormer, but then the results are so much more satisfactory than buying one off the shelf!

Enjoy the pics, thanks for visiting, and see you next time!!





















© José Pereira Torrejón. All rights reserved. No part of the content of this blog may be distributed, published or reproduced without prior authorization from the author.

Friday, September 14, 2018

Rain

This year marks the 20th anniversary of the birth of 'Rain' as a graphic novel character. A character born out of sorrow, out of loss, the ghost of a young girl that visits the realm of the living to tell tales of the beyond, and to bring justice and solace to those in need of it. 

Below is a watercolor painting which I did of her back in 1998. This and two other drawings took part in an exhibition for upcoming graphic novel artists held in that same year in the 'legendary' graphic novel shop 'Mekanik Strip' in Antwerp, Belgium. Today the portrait graces one of my living room walls.

Rain artwork, which was exhibited in Mekanik Strip, the 'legendary' graphic novel shop in Antwerp, Belgium.
After the exhibition I produced a couple of short stories featuring 'my daughter', as I affectionately call her. They were published under the name 'Rain's FreakShow' both online and 'on paper'.

During a comics fair in The Netherlands, I showed one of the stories to the late (yet immortal) Don Lawrence of 'Storm' fame. He looked at it with great interest, took his time and gave me his compliments for my work. I remember few moments in my life when I felt as happy as on that day..!


Following the initial success, the project came virtually to a standstill. I became increasingly frustrated by the feeling that I could not depict Rain as I saw her in my head. She became something larger than life to me, an entity that I could not 'translate' from the ethereal realm of shadows to the reality of crispy white paper. So the production of artwork stopped, and Rain continued developing in my head, and in my heart instead, invisible to the public, but very much present as part of my everyday life.

A 'one off' manga-style Rain comic strip (Dutch).

Rain's FreakShow 'BLACK STAR' logo.

Some years ago, while visiting a dolls & teddy bears fair, I saw something that took my breath away. There, standing on a display table, was a doll that bore an uncanny resemblance to my Rain! Some differences aside, she had a total 'Rain' feel to her!!! The maker, an incredibly talented lady named Mrs Willeke de Swart, had created a doll that made my heart jump with joy! Of course I had to have her, the hefty price tag that comes naturally with such a unique, hand made porcelain doll was the least of my concerns!


Rain, Oscar, and me.

Once I 'adopted' the doll, which of course I immediately christened 'Rain', I decided to commission a rather 'creepy' teddy bear for her, just like the one she has in the stories. This teddy (Oscar) was made according to my specifications by a real pro: the lovely Marrie van Vliet. She even made 'Oscar' in two sizes, one for Rain, and another, much bigger one for photography purposes. 

Fast forward to today, the 'Rain doll' has featured in countless photo shoots (and so has Oscar), and kept the dream alive that, some day, my Rain will come out in full force, ready to take over the world and fulfill her destiny as the bringer of solace, the comforter, the one that takes your tears away...



"I am your shadow, the echo of your soul.." (Rain)



"Sometimes, she comes to life, 
and is just there for me,
to bring me joy and peace..."






"Look at those eyes, those are not the eyes of a doll!
Behold her lips! Soft as the petals of a rose!
Look at her skin, that is no longer porcelain,
but real, warm, breathing skin.."


"Sometimes, she comes to life and is just there for me, to bring me joy and peace..."

© José Pereira Torrejón. All rights reserved. No part of the content of this blog may be distributed, published or reproduced without prior authorization from the author.

Wednesday, September 12, 2018

Jane's attic, update XIII: A window with shutters.

Some time ago I was working on a window for Jane's attic. It was supposed to be a 'blind' window, intended to give the attic a more claustrophobic feel. 

However, as the 'Attic' project progressed, I kept thinking about the freakin' window... there was something about it that felt 'wrong'. Then I came across this other window with shutters, and suddenly I knew it: the window needed to be able to open, and have shutters to allow light to pass through them, giving the attic a more magical atmosphere!

In this feature, I'm gonna tell you how I transformed a boring, untreated window with very basic, false shutters into something much more realistic.



So the window I bought had awfully looking, false shutters stuck to its sides. The shutters were carved only on the front, simulating partitions, and obviously didn't allow any light to go through them, as they were made of solid pieces of wood.

The original shutters.
I couldn't possibly use these things, they were hurting my eyes, so I decided to take them apart, and reconstruct them in a more realistic way.


As you can see on the above image, the partitions were solid pieces, and their back was plain (see piece of wood to the right, which is actually a shutter viewed from the back).


I kept only the center pieces of the shutters, and added new wooden laths to the sides. Then I treated the frames with antique English wax.


Next I cut very thin strips of wood, to be used as partitions, and stuck them one by one between the frames. I did this is a very 'sloppy' way, because I wanted to give them a very old, battered look, with some of the partitions missing. Well, 'sloppy' may not be the right word, as I'm a control freak, so there is method even to my cough! Anyway, I studied pictures of old, battered shutters online, and tried to recreate them here. I painted each partition individually, and even 'mangled' some of them for a better effect. I drilled holes in the shutters and the window frame, and added metal pins, in order to attach them in place, so they would be able to open and shut. Below is the final result.



Then I stuck the window in the wall where it belonged (see below). I think it looks pretty neat! For comparison, I too a pic of the initial, 'blind' window, and the new one sitting side by side. I think I made the right choice. The other one will be weathered further, and be used for another project, so the work I put in it is not wasted!



Finally, below are a bunch of close up pics I took with my macro lens. You are free to drool while looking at them if you want, in fact I encourage it! Could they have been done even better? Sure! But these are far exceeding requirements for their intended purpose, so this boy is a happy camper, thank you!

Next time I'll show you how I did the walls!

Thanks for visiting and see you next time!!!
















© José Pereira Torrejón. All rights reserved. No part of the content of this blog may be distributed, published or reproduced without prior authorization from the author.